Qovia sensors are placed on an IP telephony network to collect critical call quality information as calls occur. The sensors monitor voice-specific RTP data streams and send call quality information to the Qovia Service Manager software center, which calculates a Mean Opinion Score (MOS) for each monitored call. Rather than determining the average quality for a call, the end-user’s call experience is captured, analyzed and reported every 60 seconds for an accurate reflection of call quality as a call occurs. Voice quality alerts are issued when specific user-defined thresholds for call quality are exceeded.
Qovia sensors come in three sizes for unlimited scalability and directly interface with IP PBXs and other VoIP network devices to provide dedicated, real-time IP telephony monitoring and information gathering. You can install an unlimited number of Qovia sensors throughout the network to address requirements across the enterprise.
All Qovia sensors
- Enable passive, real-time call stream analysis
- Support active testing of IP telephony networks
- Monitor switch, router, gateway and CallManager performance
- Track gateway failures and successful calls
- Support polling for CallManager and CallManager Express phone discovery
Qovia® 3000
- Supports 50 simultaneous calls
- Supports up to 5 network elements
- Features 2 universal terminals
- Features 2 RJ45 serial ports
- Is small office compliant (FCC part 15 Class B)
- Is Power over Ethernet compliant (802.3af)
- Has a 10/100 Ethernet interface
Qovia® 5000
- Supports 200 simultaneous calls
- Supports up to 10 network elements
- Features 20 universal terminals
- Features 4 DB9 serial ports with port extender
- Has a 10/100 Ethernet interface
- Features dial-up networking support with a universal terminal modem back-up
- Provides UPS monitoring
- Monitors switch network statistics (utilization and errors)
- Monitors gateway capacity and utilization
- Monitors stream gateway statistics (dialed digits, trunk, channel)
- Performs detailed phone configuration discovery
- Stores call quality information locally in the event of network disruption
Qovia® 7000
- Supports 500 simultaneous calls
- Supports up to 40 network elements
- Features 20 universal terminals
- Features 4 DB9 serial ports with port extender
- Has a 10/100/1000 Ethernet interface
- Features dial-up networking support with a universal terminal modem back-up
- Provides UPS monitoring
- Monitors switch network statistics (utilization and errors)
- Monitors gateway capacity and utilization
- Monitors stream gateway statistics (dialed digits, trunk, channel)
- Performs detailed phone configuration discovery
- Stores call quality information locally in the event of network disruption
|
